FMEA Analysis Document Searching

Documentation

Activate FMEA Analysis

1. Do you have a serial number?

Before activating Pro Edition, you need a Serial Number of Pro Edition. After you complete your purchase you will receive an email that includes a serial number in a few minutes.

If you don’t this email in your inbox after 15 minutes, please check your spam or bulk email folder. If it is still not there, it could be a problem with our license server or it was blocked by your email server. In that case please inform the iQASystem support team at support@iqasystem.com.

2. How to Activate FMEA Analysis

Open the activation dialog by click Activate Pro Edition from the FMEA Analysis ribbon tab.

Activation dialog shows up, select Yes, Active Now

2.1 Auto Activation

If you have an internet connection from the computer you installed FMEA Analysis, you should use Auto Activation because it’s very quick. To activate FMEA Analysis, follow below steps

Auto Activation Dialog and Step
  1. Select tab Auto Activation
  2. Copy the serial number that you received from support@iqasystem.com after purchase it, and paste in Serial Number textbox
  3. If you use a proxy for an internet connection, you must specify your proxy for FMEA Analysis. If you don’t, ignore this step and step 4. FMEA Analysis uses the proxy settings from your Internet Property. If you need to change it, click Change Proxy Settings
  4. If your proxy requires authentication, you must provide Username and Password by check on Proxy requires authentication and input your username and password.
  5. Then click Active, if your Serial Number is correct, it will be activated.

Note: FMEA Analysis Activator will connect to the internet to complete activation, so if you have a firewall, you should open your firewall for Microsoft Office Excel when you are activating the product.

2.2 Manual Activation

If you don’t have an internet connection from the computer you install FMEA Analysis, you should use Manual Activation. To activate FMEA Analysis, follow below steps:

FMEA Analysis Pro Edition Manual Activation
  1. Select Manual Activation from activation dialog.
  2. Copy the Hardware ID. Then send your Hardware ID and Serial Number to support@iqasystem.com. You will receive an email that includes a license file (.lic) no later than 24 hours (Except weekend).
  3. Click Active. You will be requested to specify the license file to complete activation.

Related Resources:

Updated on March 28, 2022

Download FMEA Analysis

And get the lastest news and supporting articles

An email with download link and installation instruction will be send to your email address in a minute.

Cookie Consent with Real Cookie Banner